RSF330 Road Saw
Application
The floor saw is powered by a Deutz diesel engine. This TRAXX fully hydraulic road saw is equipped with central engine monitoring with disturbance cut-off. The cutting motor is driven directly via a fan belt whose tension is set by Ex-centre. In the standard version, the cutting wave speed is optimised for blade diameters of between 700 - 1000mm. With this feature, the machine is particularly suitable for depth cuts in old concrete and asphalt.
The RSF330A, is laid out for fresh concrete cutting saw-blade diameters of between 300 - 500mm. Blade fitting can be implemented from either side of the machine.
The cutting roller is fully housed and protected on both sides by contact-free shaft seals. The roller-guided blade protection is so constructed that it completely covers the blade regardless of the excavation height. The hydraulic feed drives the back wheels via a spur gear. These are provided with a traction-optimised castor. The hydraulic excavation rocker guarantees a constant machine centre of gravity.
Comfort
The RSF330 is equipped with many functions which make operation very comfortable.
The drive motor and operator's controls are rubber mounted. Vibrations that could cause injury are thereby hindered from reaching the operator.
All steering and monitoring functions are integrated in the clearly laid out control console.
It has warning lights for fuel levels and water supply, as well as having track correction, which is a manually operated feature that works in both directions and is connected to the rear axle to compensate lateral thrust forces during cutting.
A button on the hand grip operates a hydraulically extendable swivel roller which simplifies setting and turning the machine.
Switching the engine speed between idling and working speed is controlled by an electronic switch.
Maintenance
Due to its design, all of the relevant maintenance parts on the RSF330 are easily accessible for servicing.
The coarse and fine dust cartridges of the dry air filter can be cleaned or exchanged comfortably whilst standing. Just as simple to service are the engine oil filters at the back of the engine, as well as the water pump impeller at the front. Hydraulic oil can be filled via the refill nozzles on the control panel. The oil level, as well as the temperature, are readable in a combined display.
The cover plate at the back of the machine is secured with 4 fasteners, and can be opened without tools. Behind it are situated the battery and the fuse box.
The hydraulic tubes are continuously coded for easy spares procurement.
Technical Data
| Max. Cutting Depth | 380mm |
| Blade Diameter | 700 - 1,000mm |
| Speed of Cutting Roller | 1,200 rpm |
| Bore Hole of Blade | 35mm + 6-hole on 120mm pitch circle |
| Input Side of Blade | Right or Left |
| Rotation Direction of Blade | Same Direction |
| Max. Blade Width | 20mm |
| Blade Drive | V-belt 5 x XPA Direct |
| Cutting Depth Adjustment | Hydraulic by Rocker Arm |
| Output Drive Motor | 33 kW (2,300 rpm) |
| Engine Model | Deutz D 2011 L 03 i (Diesel) |
| Fuel Tank Capacity | 28 ltr |
| Emission Class | EC-NRMM, Stage IIIA / EPA Tier 3 |
| Traction Device | Hydraulic by Two-stage Spur Gear Transmission |
| Auxiliary Hydraulic | 25 l/min - 180 bar |
| Water Pump | Hydraulic Driven Impeller Pump |
| Water System | Nozzles on the Blade Guard |
| Wheelbase | 760mm |
| Dimensions w/out Blade Guard (l / w / h) | 1,550 / 1,060 / 1,200mm |
| Weight | 950 kg |
Features
Click to enlarge images
RSF330 Road Saw
