HCS Pro Hydraulic Cut-off Saws
All types of the HCS Pro Hydraulic Cut-off saws can be used for horizontal and vertical cutting.
They cut all types of concrete, steel, brick wall and asphalt etc.
The hydraulic cut-off saw is a very sturdy tool intended for cutting even under the most extreme conditions.
It is completely unaffected by water and dust, and all parts run in oil. The saw is built for hard use on a daily basis, without breakdowns.
The fact that the saw is always working and does not require service means higher profits than other types of saws.
The cut-off saw offers top safety with the built-in ASCO System (Automatic Safety Cut off).
The tool automatically cuts off if the disc jams - therefore no injury to the operator.
Benefits
- High performance
- Cuts off if the disc jams
- No petrol engine - no exhaust fumes
- Low weight
- Low noise and vibration level
- All parts run in oil which means less service and longer life
- Slim design allows close cutting to corners
- No air filter
- Can cut under water
Technical Data
| HCS14 PRO | |
| Disc size | 14 |
| Oil flow, l.p.m. | 20-30 |
| Working pressure, bar | 120 |
| Max. pressure, bar | 172 |
| Weight w/o hose/disc, kg | 8.5 |
| Cutting depth, mm | 137 |
| Noise level Lpa dB | 105 |
| Noise level Lwa dB | 116 |
| Vibration level, m/s | <2.5 |
| HCS16 PRO | |
| Disc size | 16 |
| Oil flow, l.p.m. | 20-40 |
| Working pressure, bar | 120 |
| Max. pressure, bar | 172 |
| Weight w/o hose/disc, kg | 9.0 |
| Cutting depth, mm | 162 |
| Noise level Lpa dB | 97 |
| Noise level Lwa dB | 108 |
| Vibration level, m/s | <2.5 |
| HCS18 PRO | |
| Disc size | 18 |
| Oil flow, l.p.m. | 20-34 |
| Working pressure, bar | 120 |
| Max. pressure, bar | 172 |
| Weight w/o hose/disc, kg | 9.4 |
| Cutting depth, mm | 187 |
| Noise level Lpa dB | 99 |
| Noise level Lwa dB | 110 |
| Vibration level, m/s | <2.5 |





